Stainless Steel 420 Fasteners are tough, martensitic stainless steel components crafted for situations where you need outstanding hardness, wear resistance, and decent corrosion resistance. You’ll often find these fasteners in settings where mechanical strength takes precedence over corrosion resistance. Thanks to their ability to be heat-treated for high hardness, Stainless Steel 420 fasteners are perfect for high-load or wear-heavy assemblies. They deliver reliable and long-lasting fastening solutions across various industries, including automotive, engineering, aerospace, and tooling, especially in scenarios where surface abrasion and mechanical stress come into play.
Typically, Stainless Steel 420 is made up of 12–14% chromium and 0.15–0.40% carbon, along with small amounts of manganese, silicon, and molybdenum. This blend allows the alloy to be heat-treated to achieve hardness levels that can surpass 50 HRC, providing excellent strength and edge retention. When hardened and tempered, its tensile strength usually falls between 700 MPa and over 1000 MPa. While it doesn’t resist corrosion as well as austenitic grades, it holds up nicely in mild environments and can withstand air, freshwater, and certain food-grade substances if finished properly.
| Specifications | ASTM A 193 / ASME SA 193 |
| Standard | DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
| Size | M3 – M100 | 3/6″ – 4″ | Custom Sizes |
| Fasteners Length | 3 mm – 200 mm | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Manufacturing Process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
| Grade | C | Mn | Si | P | S | Cr |
| SS 420 | 0.15 max | 1.00 max | 1.00 max | 0.04 max | 0.03 max | 14.0 – 12.0 |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness Rockwell B (HR B) max | Hardness Brinell (HB) max |
| 420 | 480 | 275 | 16 | 95 | 201 |
Contact us to get a quick quote for your requirement.
Stainless Steel 420 Nuts offer good corrosion resistance in mild environments, making them suitable for various applications. Typically available in sizes ranging from M3 to M24, these nuts provide robust mechanical properties and are often used in low to moderate-corrosive settings.
Stainless Steel 420 Stud Bolts exhibit moderate corrosion resistance, which is ideal for applications where exposure to mild corrosive agents is a concern. Common sizes range from M6 to M30, with lengths from 50mm to 300mm, offering strength and durability in fastening applications.
Stainless Steel 420 Bolts are moderately corrosion-resistant, making them suitable for general use in environments with low corrosive potential. They come in various sizes from M6 to M30 and lengths ranging from 20mm to 200mm, providing reliable performance in diverse applications.
Stainless Steel 420 threaded rods provide moderate corrosion resistance and are suitable for mild corrosive environments. Available in diameters from M6 to M30 and lengths from 100mm to 1000mm, these rods offer flexibility and strength for various industrial and construction applications.
Stainless Steel 420 screws offer good corrosion resistance in less aggressive environments. They are typically available in sizes from M2 to M12 and have lengths ranging from 10mm to 100mm, making them suitable for general-purpose fastening in moderately corrosive conditions.
Stainless Steel 420 washers provide moderate corrosion resistance and are suitable for applications with low corrosive exposure. They come in various sizes, typically from M3 to M24, with thicknesses ranging from 1mm to 5mm, ensuring proper load distribution and stability in fastening systems.
We offer a variety of test certificates for our Stainless Steel 420 Fasteners, including MTC according to EN 10204/3.1b, PMI Test Certificate, 100% Radiography Test Report, and Third Party Inspection Certificate. These certifications attest to the quality, strength and veracity of our fasteners while assuring that our products conform to the requirements of the industry and to the requirements of our clients. Our rigorous testing process and commitment to transparency deliver a reliable and trustworthy experience, giving our valued clients confidence in the superior performance and durability of our Stainless Steel 420 Fasteners across various demanding applications.
You’ll find Stainless Steel 420 Fasteners in a variety of applications, from machinery parts and pump components to valve assemblies and precision tools. They’re also used in cutlery, surgical instruments, and industrial equipment where hardness and dimensional stability are key. These fasteners shine in applications that involve friction, impact, or repeated mechanical stress. Although they’re not the best choice for highly corrosive or chloride-rich environments, 420 fasteners strike a great balance between strength, wear resistance, and cost-effectiveness for general and mechanical uses.
©2024 Harshita Stainless All Rights Reserved.
