Home > Electrodes > AWS Class ER410 Mig & Tig Filler Welding Wire & Rod
Harshita Stainless is a trusted supplier and manufacturer of AWS Class ER410 MIG and TIG Filler Welding Wire and Rod, available in Dubai and India. ER410 is a martensitic stainless steel filler metal mainly used for welding and surfacing of 12% chromium steels and similar alloys. Known for its high hardness and wear resistance after post-weld heat treatment, this filler wire is perfect for applications that need strength, abrasion resistance, and corrosion protection.
The ER410 filler wire has 11.5–13.5% chromium with low carbon (0.08–0.15%) and small amounts of manganese and silicon. It provides a tensile strength of 90–110 ksi and moderate ductility. Being a martensitic steel, it hardens in air and requires post-weld heat treatment to achieve optimal mechanical strength. It is characterized by high hardness, good resistance to oxidation, and wear. In TIG and MIG welding, ER410 produces stable arcs, controlled weld deposits, and crack-resistant joints for use in critical hard-facing and fabrication tasks.
| Classification | AWS A5.9, ER410 |
| Form | MIG spools, TIG cut lengths, Reels and Coils |
| Type Of Welding | Inert Gas Welding |
| Current | MIG-DCEP / TIG-DCEN |
| Diameters | .023”, .030”, .035”, .045”, 1/16”, 3/32”, 1/8” |
| Standard TIG straight lengths are available | 36” (914 mm) or 39” (1000 mm) lengths. Other lengths available upon request. |
| AWS ER410 MIG & TIG Filler Metal Application & uses |
|
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
| 0.12 | 11.5-13.5 | 0.6 | 0.75 | 0.6 | 0.5 | 0.03 | 0.03 | 0.75 |
| Yield, kpsi: | 78 |
| Tensile Strength, kpsi: | 89 |
| Elongation%, min: | 24 |
Contact us to get a quick quote for your requirement.
ER410 MIG filler wire offers high strength and wear resistance, ideal for welding martensitic stainless steels in applications requiring durability and high-temperature performance.
ER410 TIG filler wire provides excellent hardness and abrasion resistance, suitable for welding stainless steel components exposed to high stress and wear, ensuring strong, durable joints.
ER410 TIG filler rod delivers superior hardness and wear resistance, used for welding martensitic stainless steels in high-stress environments, offering strong, reliable welds and durability.
Each AWS Class ER410 MIG and TIG Filler Welding Wire and Rod is carefully packed using high-quality materials. To prevent any damage or corrosion during transit. We are committed to guaranteeing customer satisfaction by providing timely deliveries. Through efficient transportation methods. Along with the products, we also supply all the necessary documentation to our clients at the time of delivery, ensuring complete transparency and support throughout the process.
ER410 filler welding wire and rod are used in turbine blades, pump shafts, valves, and other parts that face high wear and oxidation. It is great for hard-facing in power plants, petrochemical refineries, and hydraulic systems. The filler metal is also used for surfacing mild steel components for resistance against corrosion and wear. Post-weld heat treatment is recommended to restore toughness and relieve stresses. ER410 is widely applied in furnace parts, mechanical seals, petrochemical piping, and general maintenance welding where strength and surface durability are crucial.
©2024 Harshita Stainless All Rights Reserved.
